Hand basins
Hand basins in consulting and treatment rooms, set out to the drawings, then connected and tested at fit-off.
Medical and healthcare fit-outs on the Sunshine Coast
We plumb medical and healthcare fit-outs across the Sunshine Coast, from consulting and treatment rooms to staff amenities. We work to the hydraulic drawings and hand over the compliance paperwork at the end. Email your drawings to info@bbplumbing.au and we'll quote the job in writing.
Request a quote
- 5.0
- QBCC licence15305437
- Master PlumbersQueensland member
What's different about plumbing a medical fit-out?
Safe hot water is the big one. Basins in consulting and treatment rooms usually get a thermostatic mixing valve, so the water comes out at a set, safe temperature. The water supply often needs a backflow device as well. And the plumbing has to be signed off before the rooms open.
What we fit in medical and healthcare rooms
Thermostatic mixing valves
A mixing valve blends hot and cold water so it leaves the tap at a set, safe temperature. We fit them at basins and showers. Aged care and childcare use them for the same reason as healthcare: scalding is a real risk.
Backflow prevention
A backflow device stops water inside the building flowing back into the town supply. We fit them on the incoming water.
Hot water
Hot water for the basins, the staff kitchen and the amenities, sized to how many rooms use it.
Staff kitchens and amenities
Staff toilets and kitchens, and filtered or boiling water units for the break room.
How a medical fit-out runs
Drawings and quote
Send the hydraulic drawings and the number of consulting and treatment rooms. We price the job and send you a written quote.
Plan around the practice
If the practice stays open while we work, tell us your hours and which rooms have to keep running.
Rough-in and fit-off
Pipes, mixing valves, backflow devices and hot water go in to the drawings. Then every basin and tap is connected and tested.
Handover
The compliance certificates and records go to you, the builder or the building owner.
Reviews from our customers
We contracted Blue Bourke Plumbing to do the complete plumbing fit out of a secondary dwelling we’re building. We chose Chris because of his knowledge and attention to detail. From our first discussions we knew Chris was the right choice because he came up with practical solutions to some problems early on. Chris has a thorough working knowledge of plumbing and building codes which has made certification hassle free and his workmanship is meticulous, tidy and first rate.
Chris was very efficient and a pleasure to deal with. I would definitely recommend his services. Margaret
Margaret C.
Chris was wonderful. My sister and I sent photos of our old toilet and he emailed us 3 styles of toilets to choose from. So easy. He turned up on time and was very neat. We would highly recommend him.
Linda P.
Chris provided us with good solutions to our plumbing issues. He left our home tidy and has great attention to detail. We defiantly recommend Blue Bourke Plumbing!
Marilyn C.
Where we plumb medical fit-outs
We take on medical and healthcare fit-outs in these Sunshine Coast suburbs.
Common questions
We fit mixing valves and backflow devices, but we don't commission, test, service or certify them. They still need regular checks, so plan for that with whoever manages the building.
You get the compliance certificates and records the certifier and the building owner ask for. If a builder is running the job, they go to the builder.
Fitting out a practice?
Email the drawings and the site address to info@bbplumbing.au, and tell us how many consulting or treatment rooms there are. Or ring 0413 291 781 to talk it through.